| |
|
| |
|
PT2: This packing is produced by 100%
PTFE and It is lubricated with heat dispersion to
increase speed performance.
It is recommended for applications involving
food, chemical and pharmaceutical products. |
|
| |
|
| |
|
| |
|
PT3: This packing is made using pure. virgin
PTFE monofilament fibres. It has gone through a
double impregnation, firstly on each strand.
secondly in dispersion.
Suitable in all acid and basic fluids compatible
with PTFE. For food use require our Style PT1. |
|
| |
|
| |
|
| |
|
PT4: Made from pure PTFE fibres.
corners are reinforced with Kevlar.
Ideal for food and chemical industries.
For pumps, piston pumps, valves, agitators,
acids, solvents, abrasive substances. |
|
| |
|
| |
|
| |
|
PT5: Packing produced by PTFE, the core is
In rubber (NBR or VITON) to give a better flexibility.
It has a double impregnation on strand and in
dispersion. It can be used on acids and fluids
compatible with PTFE. specially for static applications
and for tank cistern covers. |
|
| |
|
| |
|
| |
|
S1: A new synthetic fibre with PTFE
impregnation and sillconfree lubricants is our
alternative to asbestos and toxic packings.
For uses in papermills, food and sugar Industries. |
|
| |
|
| |
|
| |
|
S2: Our Style S2 is made by synthetic
yarns impregnated with graphite and lubricants.
It Is usable for feeble acids and basics, steam, oils. |
|
| |
|
| |
|
| |
|
G1BB: This packing combines PTFE
with graphite. Suitable for centrifugal pumps
and low pressure valves; Used in all fluids
except strong oxidizers. |
|
| |
|
| |
|
| |
|
G2: Manufactured in a particular
process, the PTFE Graphite yarn braided with
KEVLAR in a Zebra way. For pumps, agitators,
valves, mixers, acids, solvents, abrasive substances,
food industries and papermills. Available PTFE
Graphite packing with reinforced comers in kevlar G3. |
|
| |
|
| |
|
| |
|
G4: Packing made from pure PTFE
Graphite filaments without lubricant, effects
better resistance to extrusion.
Suitable to alternative equipments in medium
and high pressure valves up to 500 bar.
For all fluids except strong oxidizers. |
|
| |
|
| |
|
| |
|
K1: Made from continuous aramid fibres
which are with PTFE dispersion and lubricants,
it is not flammable and thermostable.
Suitable for centrifugal and piston pumps, slide
and low pressure valves. |
|
| |
|
| |
|
| |
|
K2: Manufactured by combed and twisted
original aramidic fibres, the impregnation is made
in two stages: during the braiding and then on the
surface of the finished product.
Usable on centrifugal pumps, agitators, mixers, in
papermills and sugar industries. |
|
| |
|
| |
|
| |
|
n1: Made from pure ramie yarns with
PTFE impregnation, it does not damage or groove
shafts and sleeves. It is very resistant to fuel,
oils, greases, salt water and solvents.
Suitable for centrifugal and piston pumps, in
breweries, refineries and sugarmills. |
|
| |
|
